Sort by
Refine Your Search
-
Category
-
Country
-
Employer
- Delft University of Technology (TU Delft)
- Aalborg University
- Abertay University
- BAM Bundesanstalt für Materialforschung und -prüfung
- CNRS
- ETH Zürich
- Eindhoven University of Technology (TU/e)
- NTNU - Norwegian University of Science and Technology
- National Research Council Canada
- University of Nottingham
- University of West Bohemia
- 1 more »
- « less
-
Field
-
, several different configurations will be evaluated with your CFD-FEM models and tested at TRL4 (10 kWe) at TU/e to identify the most promising configurations and operation modes, first only for heating
-
technology for internal resistive heating of chemical reactors, several different configurations will be evaluated with your CFD-FEM models and tested at TRL4 (10 kWe) at TU/e to identify the most promising
-
; • mathematical modelling, development of FEM models (preferably using Ansys), and simulations, particularly in the areas of electromagnetics, power losses, etc.; evaluation, verification, and optimization
-
, electrical machines, power electronics, dielectric/insulation materials, or related areas would be advantageous. Knowledge of numerical/FEM simulation tools such as COMSOL Multiphysics and MATLAB. Programming
-
numerical model using Abaqus Finite Element Modelling (FEM) software, validated through comparison with the centrifuge modelling data. Using the validated numerical model, conduct a comprehensive parametric
-
resistance of ceramic shell moulds used in investment casting. Advanced in situ experiments combined with multi-scale Finite Element Method (FEM) modelling will be employed to identify the key stress and
-
in-house design. Strong ability to use simulation software tools including finite difference time domain methods (FDTD), eigenmode expansion methods (EME), or finite-element methods (FEM), using tools
-
relevant technical topics, comprising a minimum of 30 ECTS. Conduct coupled CFD–FEM (e.g. STARCCM-ABAQUS) simulation of wave-induced motions, connector loads, mooring loads and structural deformation
-
BAM Bundesanstalt für Materialforschung und -prüfung | Berlin, Berlin | Germany | about 2 months ago
the development of numerical methods for modelling wave propagation and structural dynamics (e.g. FEM, semi-analytical methods) Experience in one or more of the following areas is desirable: wave propagation in
-
report the skills that are relevant for the PhD positions you are applying): o continuum mechanics for large deformations o numerical mechanics and analysis (FEM simulations, meshing, etc.) o programming