CONTEST EDITION FOR RESEARCH INITIATION SCHOLARSHIP
Bearing in mind Regulation No. 437/2020 on Research Grants of the Polytechnic Institute of Setúbal, published in the Diário da República 2nd series No. 83 of April 28, it is made public that, by order of 05-08-2021 05/08/2021 of the Vice-President of the IPS Professor Ângela Lemos, in the substitute regime of the President, a contest is open for the attribution of a Research Initiation Scholarship. aimed at carrying out R&D activities for students enrolled in Master's degree., under the project Bioscaff - Production of Ceramic Scaffolds for Bone Regeneration by 3D Printing, financed through IPS with the period for receiving applications from 27-09-2021 to 11-10-2021, in accordance with the following conditions :
• Students enrolled in a master's degree in Technology /Biomedical Engineering or related fields;
- Knowledge in 3D printing, CAD modeling and laboratory techniques;
- Sense of responsibility and ability to communicate and integrate into multidisciplinary work teams.
The plan of activities to be developed by the scholarship holder is inserted in activities 3 and 4 of the BioScaff project.
Main activities:
• CAD modeling of geometries for drawing scaffolds;
• Preparation of composite resins for the production of scaffolds;
• Printing (SLA) of scaffolds;
• Morphological and mechanical analysis of the scaffolds produced;
• CAD modeling and scaffold printing for a lumbar fusion cage.
Month 1:
• CAD modeling of geometry for scaffolds;
• Preparation of resins;
• Scaffold printing;
Month 2:
• Preparation of resins;
• Scaffold printing;
• Morphological and mechanical characterization;
Month 3:
• Morphological and mechanical characterization;
• CAD modeling of scaffolds in the shape of a lumbar fusion cage;
• Printing of modeled scaffolds;
Month 4:
• Morphological and mechanical characterization of the lumbar fusion cage;
- 5.1.CURRICULUM EVALUATION and MOTIVATION LETTER (CE+ML)-(scale of 0-15 values)
Enrollment in a master's course in the areas of Technology/ Biomedical Engineering
15 val.
Enrollment in a master's course in related fields
10 val.
With knowledge in the areas of 3D printing, CAD modeling and laboratory techniques for the production of scaffolds for bone regeneration
15 val.
With knowledge in the areas of 3D printing, CAD modeling and laboratory techniques.
10 val.
No knowledge in the areas of 3D printing, CAD modeling and laboratory techniques
5 val.
Very good
15 val.
Good
10 val.
satisfy
5 val.
Does not satisfy
0 val.
Very good (presents motivational factors related to the activities to be performed as a scholarship holder duly framed in the role)
15 val.
Good
10 val.
satisfy
5 val.
Does not satisfy
0 val.
--- 5.2.SELECTION INTERVIEW (0-5 points scale)
In the interview, 4 evaluation parameters are defined and their classification results from the following formula: I=MI+TTK+CS+VEF
- Motivation and Interest (MI)
- Theoretical and Technical Knowledge (TTK)
- Critical Sense (CS)
- Verbal Expression and Fluency (VEF)
Each dimension is scored with 1.25 points if the candidate demonstrates competence or behavior in the assessment and 0 points if not.
The classification of each candidate will be calculated by the sum of the values obtained in the CURRICULUM EVALUATION and in the MOTIVATION LETTER and in the SELECTION INTERVIEW.
The ranking of candidates will be expressed on a scale from 0 to 20, rounded to the nearest tenth, according to the valuation assigned to the criteria specified above. In case of a tie, the tie that has achieved the highest value in the Interview component will be used as a tie-breaker.
In order for the candidate to be admitted, he/she must reach a minimum total quotation of 9.5.
Based on the final ranking list, a reserve list will be created, which will be used for the eventual hiring of the candidate ranked in 2nd place, in the event of withdrawal of the candidate ranked in 1st place, or candidates/ the following in the final ranking in case of more dropouts.
• Letter of motivation addressed to the President of the IPS;
• Candidacy form;
• Curriculum vitae;
• Proof of student status of the degree and course, issued by the Academic Division of the Higher Education Institution in which you are enrolle.
- Presidente- Professor Doutor Ricardo Miguel Gomes Simões Baptista, Professor Adjunto da Escola Superior de Tecnologia de Setúbal/IPS;
- Vogal efetivo- Professor Doutor Célio Gabriel Figueiredo Pina, Professor Coordenador da Escola Superior de Tecnologia de Setúbal/IPS;
- Professora Doutora Ana Mafalda Saldanha Guedes, Professora Adjunto da Escola Superior de Tecnologia de Setúbal/IPS.
Applicable legislation and regulations: The grant is awarded under Law No. 40/2004 of 18 August, in its updated version (Statute of Scientific Research Fellows) and Regulation of Scholarships and Research of the Foundation for Science and Technology, available for consultation in https://www.fct.pt/apoios/bolsas/regulamento.phtml.pt
Polytechnic Institute of Setúbal, September 23, 2021
The presidente
______________________________________
Prof. Doctor Pedro Dominguinhos
Similar Positions
-
Ph D Student In Neurochemistry, Stockholm University, Sweden, 2 days ago
Ref. No. SU FV-1002-24 at the Department of Biochemistry and Biophysics . Closing date: 23 April 2024 The Department is mainly located with the other Departments of Chemistry and Life Sciences in ...
-
Reannouncement Ph D Stipend In Precision Health Diagnostics For Improved Prediction, Diagnosis And Monitoring Of Adverse Effects – A Sino Danish Collaboration, Aalborg University, Denmark, about 14 hours ago
Department of Health Science and Technology carries out multidisciplinary research, teaching and dissemination within biomedical engineering, sports science and medicine. The department has more t...
-
Ph D Position Data Driven Additive Manufacturing , Delft University of Technology, Netherlands, 2 days ago
Bring additive manufacturing processes closer to the resilience found in the growth of living organisms This project offers agile creative working, and brings science closer to societal impact. Th...
-
Ph D Scholarship In Development Of Oral Vaccines For Fish – Dtu Aqua, Technical University of Denmark, Denmark, 10 days ago
Skip to main content. Profile Sign Out View More Jobs PhD scholarship in Development of Oral Vaccines for Fish – DTU Aqua Kgs. Lyngby, Denmark Trending Job Description Join us on our mission to mo...
-
Ph D Position Effect Of Defects In Wind Turbine Blade Manufacturing, AcademicTransfer, Netherlands, 20 days ago
PhD Position Effect of Defects in Wind Turbine Blade Manufacturing PhD Position Effect of Defects in Wind Turbine Blade Manufacturing Published Deadline Location today 12 May Delft PhD Effect of D...
-
Ph D Position Effect Of Defects In Wind Turbine Blade Manufacturing, Delft University of Technology, Netherlands, about 10 hours ago
Challenge: Defects lead to repair/rejection of part Change: Manufacturing data quantifying defects Impact: Reduce unnecessary composite waste As a Ph.D. researcher, you will spearhead a critical i...