One or more PhD stipends in Smart Production (915-21007)
At the Faculty of Engineering and Science, Department of Materials and Production (Section of Production), one or more PhD stipends in Smart Production is available from 15 March 2021 or soon thereafter. Department of Materials and Production (MP) has a wide-ranging research and educational environment at Aalborg University. The Department's mission is to meet the future's demands for new materials and production systems by directing the whole value chain from basic material understanding, materials' applications in mechanical constructions, industrial production and management. The department has several strong, international and innovative research groups which comprise everything from basic science to strategic and applicable research. The activities encompass research as well as education within materials, mechanics, physics, production technique, and industrial management and innovation. Benefitting the industry and additional collaborators several innovative and unconventional collaborations have been and are developed through interdisciplinary co-operations. Thereby, as an employee at the Department you will become a part of an international research environment, where focus is on innovation, knowledge sharing/building and interdisciplinary collaborations.
The PhD stipends are part of the new MADE FAST research and innovation program. MADE is a national collaboration platform accross universities, industry and RTO’s. MADE FAST is funded by Innovation Fund Denmark, the industry and universities. The research will be conducted in close collaboration with the industrial partners in MADE FAST. Read more on: https://www.made.dk/ .
We are looking for a candidate to a workstream that address execution and optimization of the entire end-to-end value chain, and the goal is to address the following problems: 1) How to create the foundation and data platform as well as new collaboration methods; 2) How to manage complexity in operations and supply chains; and 3) How to develop new solutions by iterative exploration through joint industrial demonstrators.
The specific project is in collaboration with Velux and partnering with Siemens. Already, VELUX have embarked on a digitalization journey and have implemented RFID tags in their components and products, as well as sensors in their manufacturing equipment. However, they have yet to formalize a way to work data-driven, to capture and organize this data, and thus, have yet to utilize the data to its full potential. Therefore, the purpose of this project is to develop methodologies to capture, organize, and use data from VELUX’s digitalization projects to derive insights from and to optimize their Manufacturing and Supply Chain Operations.
We are looking for academic strong candidates with a Master of Science in Engineering, Management Engineering or Manufacturing Technologies – or similar background. The applicants must be personally motivated to pursue a PhD study and on top of this have good written and verbal communication skills as the research will be conducted in a highly interactive and collaborative environment where industrial demonstrators play a major role.
As a successful candidate you will participate in education, academic and collaborative research activities in the production section and with external partners. The research covered by these positions will all be within the area of smart production.
- Access to a state-of-the-art research laboratory equipped with a variety of mobile robots, collaborative robotic platforms, industrial robotic arms, drones, cyber-physical modules, exoskeletons, and numerous cameras and relevant equipment for experiments.
- Multi-disciplinary and international environment.
- A chance to see your research being brought into practice.
- Strong engagement with industry.
- Flexible working hours.
- Casual working environment.
Industrial engagement and impact is the key to the position and the candidates are asked to qualify their experience with industrial research as part of the application.
In the individual positions a main industrial partner is specified, but the candidate will also be linked to a unique network of MADE consortium partners and the overall MADE platform consisting of more than 50 industrial researchers (www.made.dk ). Work will be split between the main industrial partner and AAU and physical presence is expected in both places, which also means that travelling should be expected.
Please contact Professor Charles Møller (email@example.com ) for further details.
PhD stipends are allocated to individuals who hold a Master's degree. PhD stipends are normally for a period of 3 years. It is a prerequisite for allocation of the stipend that the candidate will be enrolled as a PhD student at the Doctoral School of Engineering and Science in accordance with the regulations of Ministerial Order No. 1039 of August 27, 2013 on the PhD Programme at the Universities and Certain Higher Artistic Educational Institutions. According to the Ministerial Order, the progress of the PhD student shall be assessed regularly. It is a prerequisite for continuation of salary payment that the previous progress is approved at the time of the evaluation.
The qualifications of the applicant will be assessed by an assessment committee. On the basis of the recommendation of the assessment committee the Dean of the Faculty of Engineering and Science will make a decision for allocating the stipend.
For further information about stipends and salary as well as practical issues concerning the application procedure contact Ms Ruth Klitte, The Faculty of Engineering and Science, email: firstname.lastname@example.org , phone: +45 9940 7993.
For more information of The Doctoral School of Engineering and Science: www.phd.engineering.aau.dk
The application is only to be submitted online by using the "Apply online" button below.
AAU wishes to reflect the diversity of society and welcomes applications from all qualified candidates regardless of personal background or belief.
Appointment and salary as a PhD fellow are according to the Ministry of Finance Circular of November 10, 2015 on the Collective Agreement for Academics in Denmark, Appendix 5, regarding PhD fellows, and with the Ministry of Finance current circular on the employment structure at Danish Universities.
Share on Facebook Share on Twitter Share on LinkedIn
Online application - some good advice
Aalborg University uses an electronic recruitment system for receiving applications. Towards the bottom in the respective job advertisement you will find a link, which you need to use when applying for the position. Before uploading your application it is important that you have all relevant documentation ready in a Word or PDF format, as you need to upload all material at the same time. You cannot leave the application and return to it a couple of hours later without having to start over.
The system does not support ZIP or images files. Filenames can only contain numbers and letters, and each document must take up no more than 20 MB.
If you experience technical problems, we encourage you to try again. If the technical problems, contrary to expectation, cannot be solved, please contact the member of staff listed as the contact person in the job advertisement.
Ph D Scholarship In Modular Manufacturing Plant Design, Technical University of Denmark, Denmark, about 4 hours ago
We are searching for a strong PhD candidate within the area of modular manufacturing plant design. You will have a unique opportunity to work and do research in a strong collaboration between Rock...
Ph D Project In Deep Learning For Image Based Quality Assessment, Technical University of Denmark, Denmark, about 4 hours ago
DTUCompute’sSectionfor CognitiveSystemsinvitesapplications for a 3-yearPhDposition starting summer 2021. The project will carried out in collaboration with FOSS, a Danish company producing end-to-...
Ph D Scholarship In Digitalization Methods In Chemical Toxicity Characterization, Technical University of Denmark, Denmark, 5 days ago
Do you believe in science-based solutions? Do you want to work with international front-runners in green chemistry, sustainability assessment and artificial intelligence from academia, industry an...
Postdoctoral Position In Model Reduction And Surrogate Modelling , University of Southern Denmark, Denmark, about 6 hours ago
The Computational Science Section at the Department of Mathematics and Computer Science , University of Southern Denmark (SDU) invites applications for a two-year postdoc research position starti...
Ph D Scholarship In Humidity Effects On Electronics, Technical University of Denmark, Denmark, about 4 hours ago
If you are looking for an exciting opportunity for a PhD, we at Materials and Surface Engineering section, Department of Mechanical Engineering, Technical University of Denmark is seeking a candid...
Ph D Scholarship In Machine Learning For Multispectral Image Analysis, Technical University of Denmark, Denmark, about 4 hours ago
The Section for Visual Computing at DTU Compute invites applications for a 3-year PhD position starting early 2021. This project is concerned with deep learning for multispectral image analysis an...