Sort by
Refine Your Search
-
Category
-
Country
-
Program
-
Employer
- Argonne
- CNRS
- Delft University of Technology (TU Delft)
- Linköping University
- MACQUARIE UNIVERSITY - SYDNEY AUSTRALIA
- ETH Zurich
- Fraunhofer-Gesellschaft
- Institute of Fluid Flow Machinery Polish Academy of Science
- Macquarie University
- National University of Singapore
- Sheffield Hallam University;
- Universidade do Minho
- University of California
- 3 more »
- « less
-
Field
-
etching, physical deposition, sputtering with a specific focus on e-beam evaporation, magnetron sputtering, plasma etching, ALD, and ALE. Experience fabricating at least one of the many types
-
bulk crystals. Grow epitaxial antiferromagnetic oxide thin films, such as α-Fe2O3, Cr2O3, NiO, using magnetron sputtering system. Build and measure cavity coupling with antiferromagnetic magnon modes in
-
development, and shaping technologies (e.g., pellets, beads, extrudates, magnetron sputtering, or spray drying) is preferred. Familiarity with catalyst manufacturing processes, quality control, and pilot-scale
-
using deposition systems for nanoscale multilayer coatings and industrial scale deposition systems based on High Power Impulse Magnetron Sputtering, conventional magnetron sputtering or low temperature
-
Incident Photon-to-Current Efficiency (IPCE) measurement system and a customised roll-to-roll magnetron sputtering facility. Researchers also have access to advanced characterisation capabilities and
-
-roll magnetron sputtering facility. Researchers also have access to advanced characterisation capabilities and external synchrotron and photovoltaic facilities through national and industry collaborators
-
-roll magnetron sputtering facility. Researchers also have access to advanced characterisation capabilities and external synchrotron and photovoltaic facilities through national and industry collaborators
-
, including thin-film deposition (e.g., magnetron sputtering), electron-beam or optical lithography, and dry/wet etching Familiarity with microwave resonator design, characterization, and RF/microwave
-
vacuum coating processes and technologies for producing functional layers using reactive magnetron sputtering. Our current focus lies on piezoelectric and semiconducting oxide and nitride layers. Do you
-
) Preferential factors: experience with the magnetron sputtering physical vapor deposition technique. Workplan and objectives to be achieved: The work plan aims at the development of a biosignal sensor/actuator