Mechanical or Electro-Mechanical Technician (Engineered Systems Tec 3/4)

What You Will Do

Come join the best and brightest minds in the world at one of the most innovative and creative multidisciplinary research institutions engaged in strategic science on behalf of U.S national security. The work we do at Los Alamos National Laboratory (LANL) matters to our country and the world.

At the Los Alamos Neutron Science Center (LANSCE), we use a one-of-a-kind linear accelerator to deliver protons at 84% the speed of light to special targets to make neutrons that are used for scientific and national defense applications.

We are seeking a mechanical technician to join the Targets and Experimental Support Team. The team is responsible for the operation, maintenance, design, fabrication, and troubleshooting of target systems as well as the design, fabrication, and installation of experimental and operational equipment throughout the accelerator facility. Principal responsibilities for this position include:

Engineered Systems Tec 3 ($53,500-$82,800)

• With oversight lead fabrication projects of mechanical hardware.

• Assist in welding, testing, and installation of mechanical hardware for target systems and other systems.

• Perform and provide support for heavy lifting operations with overhead cranes and forklifts.

• Operate and help maintain mechanical systems and cooling systems including radioactive water and cryogenic systems.

• Perform troubleshooting of mechanical hardware.

• Develop technical solutions to difficult problems.

Engineered Systems Tec 4 ($64,400-$102,300)

• In addition to the duties outlined above, the (higher level title) will be required to:

• Independently lead fabrication projects of mechanical hardware.

• Independently perform support for heavy lifting operations with overhead cranes and forklifts.

• Independently maintain shop areas with minimal oversight.

• Perform troubleshooting of mechanical hardware.

• Independently develop technical solutions to complex problems.

What You Need

Minimum Job Requirements:

Engineered Systems Tec 3

• Experience performing installation, maintenance, and repairs on complex equipment and systems.

• Experience in the use of common machining tools including lathes and mills.

• Experience in common fabrication techniques.

• Experience performing independent diagnosis of failures or malfunctions, replace defective components, and perform basic troubleshooting using detailed drawings, manuals, and verbal and/or written instructions.

• Experience assisting in the design, fabrication, test and checkout of equipment and systems.

• Demonstrated ability to interact and collaborate effectively with colleagues, other groups, outside organizations, and upper management.

• Ability and willingness to be placed on a rotating on-call schedule with team members and work after hours on occasion.

• Ability and willingness to work around radiological, chemical, mechanical and cryogenic hazards.

• Ability and willingness to work independently to complete assignments.

• Ability and willingness to participate in physical activities including lifting objects up to 50lbs.

• Ability and willingness to participate in radiological activities that require multiple layers of PPE and a respirator.

Engineered Systems Tec 4

In addition to the requirements at the level 3, the Level 4 requires

• Proven ability to lead and independently carry out technical work requirements

Education/Experience:

Engineered Systems Tec 3

• Position requires an Associates’ Degree in a related field and a minimum of 3 years of related experience, or an equivalent combination of education and experience directly related to the occupation.

Engineered Systems Tec 4

• Position require an Associates’ Degree in a related field and a minimum of 5 years of related experience, or an equivalent combination of education and experience directly related to the occupation. At this level, additional training and/or certification may be expected.

Desired Qualifications:

• Experience in a machine shop performing general fabrication.

• Formal training/education in machining, welding or fabrication techniques.

• Experience following formal procedures.

• Ability to obtain and Q Clearance

• Welding experience with GTAW and/or FCAW processes.

• Ability/willingness to obtain LANL welding certifications in GTAW and FCAW processes.

Essential Job Functions (can perform with or without reasonable accommodation):Lifting 30+ pounds; carrying 30+ pounds; color discrimination, standing, climbing stairs

Location: This position will be physically located in Los Alamos, NM.

COVID Vaccine: The COVID vaccine is mandatory for all Laboratory employees, on-site contractors, and on-site subcontractors unless granted an accommodation under applicable state or federal law. This requirement will apply to those working on-site, those teleworking, and all new hires.

Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year .

Where You Will Work

Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:

• PPO or High Deductible medical insurance with the same large nationwide network

• Dental and vision insurance

• Free basic life and disability insurance

• Paid maternity and parental leave

• Award-winning 401(k) (6% matching plus 3.5% annually)

• Learning opportunities and tuition assistance

• Flexible schedules and time off (paid sick, vacation, and holidays)

• Onsite gyms and wellness programs

• Extensive relocation packages (outside a 50 mile radius)

Additional Details

Directive 206.2-Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.

No Clearance: Position does not require a security clearance. Selected candidates will be subject to drug testing and other pre-employment background checks.

New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing.

Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.

Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements.

Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to [email protected] or call 1-505-665-4444 option 1. Appointment Type

Regular

Regular

Contact Details
Contact Name Thalacker, Lindsay K.
Email [email protected]
Work Telephone
Vacancy Name: IRC91312
Organization Name AOT-OPS/Accelerator Operations
Minimum Salary
Maximum Salary
Req ID: IRC91312
Category: Science/Eng Tech Support