Apply no later than 16 June 2017
Apply for the job at DTU Nanotech by completing the following form.
Applications are invited from suitably qualified candidates for a position funded by the Marie Sklodowska-Curie Innovative Training Network (MSCA-ITN) project “Training4CRM” within the Horizon 2020 programme of the European Union. The appointment will be on a temporary basis for a maximum period of 3 years (PhD student) with start September 2017. The student will be employed as an industrial PhD by the company FelixRobotics, IJsselstein (Utrecht) in The Netherlands, and be enrolled as a PhD student at the Dept. Micro and Nanotechnology, Technical University of Denmark (DTU Nanotech).
FELIXrobotics BV develops, produces and sells premium desktop 3D printers directly to end consumers or via reseller network worldwide. Aside from the standard product portfolio, FELIXrobotics is able to provide special solutions in the field of 3D printing since the company has all disciplines in house from development up to manufacturing.
DTU Nanotech is a research institute at the Technical University of Denmark (DTU) and represents a cross-disciplinary research environment where micro- and nanotechnology are applied to a wide range of scientific disciplines, e.g. mechanics, optics, chemistry, medical technologies, and biotechnology.
Training4CRM is a four-year project, funded by the European Union Horizon 2020 Programme (H2020-MSCA-ITN-2016) under the MSCA-ITN Grant Agreement No. 722779. The project is highly cross disciplinary and focuses on bridging the existing gaps within Cell-based Regenerative Medicine (CRM) for treatment of neurodegenerative disorders (e.g. Parkinson´s (PD), Huntington´s (HD) Epilepsy (EPI)) by joint training and education of 15 PhD students within and across different scientific disciplines. The goal is to master the design, fabrication, integration and testing of completely new tools and materials within the fields of micro and nano engineering, biotechnology, and pre-clinical research. The Training4CRM network comprises 6 academic institutes and 3 industry partners from 6 European countries (Denmark, Spain, Sweden, Norway, Italy, and the Netherlands).
Responsibilities and tasks
The intended PhD student will be a member of this multi-disciplinary team and will be responsible for developing a novel hybrid 3D printing/bioprinting technology, combining different 3D printing techniques in the same printer, as well as using it to fabricate perfusable 3D hybrid scaffolds that incorporate in the same scaffold different material properties.
The candidate must meet the following requirements:
- Participate in training events for researchers and Principal Investigators involved in the training4CRM program
- Reporting to the Supervisors and Project Coordinator, which includes contributing to periodic scientific reports
- Contributing to the reporting of project milestones and deliverables in accordance with EU deadlines
- Spend required external research stays (secondments) at the project pre-defined partners of Training4CRM; a maximum of 10 months
- Promoting and disseminating results involved in the program, which includes contributing to newsletters and participating in outreach events
- Desire and ability to collaborate in a multidisciplinary team
- Desire and interest in working in industrial setting.
Candidates should have a master's degree in engineering (or a similar degree) with a background in (Bio)Mechatronics, Mechanical engineering, Electrical engineering, Biomedial Engineering, Polymer Science, or Soft Materials Engineering.
Relevant scientific background, including at least two but preferably several of the following:
- Experience in additive manufacturing, i.e., 3D printing, bioprinting
- Experience in instrument fabrication
- Experience in developing electronic control systems
- Experience in polymers/hydrogels
- CAD design (e.g. SolidWorks)
- Less than 4 years full time equivalent research experience and not yet been awarded a doctoral degree (PhD)
- Resided less than 12 months in The Netherlands in the 3 years prior to selection
- Excellent communication and organisation skills
- Fluent in spoken and written English
- Excellent writing and presentation skills
- Flexibility and ability to work in a team environment
- Availability to travel nationally and internationally two to three times a year
- Experience with outreach events
- A keen interest in pursuing pre-clinical research into neurological diseases
Approval and Enrolment
The scholarships for the PhD degree are subject to academic approval, and the candidates will be enrolled in one of the general degree programmes of DTU. For information about the general requirements for enrolment and the general planning of the scholarship studies, please see the DTU PhD Guide .
The assessment of the applicants will be made by Wilgo Feliksdal and Guillaume Feliksdal from FelixRobotics, NL and by Professor Jenny Emnéus and Associate Professor Arto Heiskanen from DTU Nanotech, DK.
Closing date for receipt of applications is Friday, June 16th 2017.
We offer an interesting and challenging job in an international environment focusing on education, research, scientific advice and innovation, which contribute to enhancing the economy and improving social welfare. We strive for academic excellence, collegial respect and freedom tempered by responsibility. FELIXrobotics BV is a well-known 3D printer company located in The Netherlands, offering one of the best Desktop 3D printers worldwide. Technical University of Denmark (DTU) is a leading technical university in northern Europe and benchmarks with the best universities in the world.
Salary and appointment terms
The salary will be in line with the European Commission rules for Marie Sklodowska-Curie grant holders (Early-Stage Researchers, Innovative Training Network).
http://ec.europa.eu/research/participants/data/ref/h2020/other/guides_for_applicants/h2020-guide-appl-msca-itn_en.pdf . The period of employment is 3 years.
The main workplace will be at FelixRobotics in IJsselstein, The Netherlands, but it also includes a mandatory external research stay and visits whenever necessary at DTU Nanotech and to other partners of the consortium.
Further information may be obtained from Wilgo Feliksdal (FelixRobotics), tel +31(0)652570780 and Jenny Emnéus (DTU Nanotech) , tel +4525473548. You can read more about FelixRobotics at www.FELIXprinters.com and about DTU Nanotech www.nanotech.dtu.dk .
Please submit your online application no later than June 16th, 2017. Apply online at www.career.dtu.dk .
Applications must be submitted asone pdf file
. For the application to be considered, all five points listed below must be addressed with all mentioned materials enclosed. To apply, please open the link "Apply online," fill in the online application form, and attachall your materials in English in one pdf file
. The file must include:
- A motivation letter describing your research career goals, skills and experience (cover letter)
- Curriculum vitae
- Grade transcripts and BSc/MSc diploma (official translation into English)
- Excel sheet with translation of grades to the Danish grading system (read the guidelines carefully to ensure that weighted average is in accordance with the Danish 7-point scale). See guidelines and excel spreadsheet here
- Two letters of recommendation.
Candidates may apply prior to obtaining their master's degree, but cannot begin before having received it.
All interested candidates irrespective of age, gender, race, disability, religion or ethnic background are encouraged to apply.
FELIXrobotics BV provides creative minds a valuable tool to realize their ideas by developing, producing and selling premium desktop 3D printers. Our company was founded in 2011 and currently sells 3D printers worldwide in more than 53 countries via approx. 30 partners. Our products are highly suitable for business and educational use, but also for the end user who values upgradability, reliability, ease of use, customer service and premium build quality. Our vision is to be an iconic brand in the field of 3d printing where customers value us on our quality and reliable products.
DTU Nanotech is a department at DTU, dedicated to conduct research, education and innovation within micro- and nanotechnology at the highest international level. Being an active player in close to 100 collaborative research projects of which many includes national and international leading companies and institutions, DTU Nanotech has a high degree of external cooperation, urging our professionalism and our competencies to the forefront.
We promote academic excellence by fostering a team-based scientific environment building on the passion, talent and skills of our international and cross-disciplinary staff. DTU Nanotech has around 215 people on its staff of which 80 are PhD students and with 40 % international employees the department constitutes an international environment.
At DTU Nanotech, we exploit sciences across the traditional boundaries of technology enabling innovative solutions for the benefit of society. Micro- and nanotechnology is applied within the biomedical, life sciences, environment, energy, security, and sensing areas.
DTU is a technical university providing internationally leading research, education, innovation and scientific advice. Our staff of 5,800 advance science and technology to create innovative solutions that meet the demands of society; and our 10,300 students are being educated to address the technological challenges of the future. DTU is an independent academic university collaborating globally with business, industry, government, and public agencies.
Ph D Student “Polymer Bounded Lipid Nanodiscs” (1.0 Fte), Utrecht University, Netherlands, about 14 hours ago
PhD student “Polymer-bounded lipid nanodiscs” (1.0 FTE) Functie A recent discovery in membrane research is the ability of synthetic amphipathic polymers of styrene and maleic acid to solubilize me...
Ph D Candidate, Technische Universität München, Germany, about 13 hours ago
25.07.2017, Wissenschaftliches Personal for the development of high-speed, multi-dimensional ultrasound and optoacoustic imaging systems for small animal and clinical imaging. Our research group d...
Ph D Fellow In Quantum Optics, University of Copenhagen, Denmark, about 19 hours ago
Department of Physics, Faculty of Science at University of Copenhagen is offering a PhD scholarship in Quantum Optics commencing 01.10.2017 or as soon as possible thereafter. Description of the sc...
Ph D Position In Nonlinear Quantum Optics Using Rydberg Superatoms, Syddansk University, Netherlands, about 3 hours ago
A PhD position is available in the Nonlinear Quantum Optics group (Associate Professor Sebastian Hofferberth). The project involves the realization of a strongly coupled system of Rydberg superat...
Ph D In Economics The Origins Of Creativity, Syddansk University, Netherlands, about 3 hours ago
PhD scholarship in Economics at the Department of Business and Economics Topic: The Origins of Creativity: How Human Relations Matter Applications are invited for a PhD scholarship at the Historic...
Ph D Scholarship In Functional Proteomics, Syddansk University, Netherlands, about 3 hours ago
A PhD scholarship is available in the research group of Professor Blagoy Blagoev, Department of Biochemistry and Molecular Biology, University of Southern Denmark, from 1 October 2017. Application...